Vulcan-Hart E24L Griddle User Manual


 
– 9 –
OPERATION
WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING
OR SERVICING THE RANGE.
CONTROLS (Fig. 6)
Model E36L Shown
Fig. 6
Element Controls Infinite load switches that control and maintain heat to the surface plates.
The controls are arranged in pairs; the left knob controls the front plate and
the right knob controls the rear plate.
Element Indicator Lights When lit, indicate heat is being supplied to the element.
Hot Top Switch (Not shown.) A 4-heat switch (HI, MED HI, MED LO, LO) controls and
maintains heat to the hot top section.
Griddle Thermostat (Not shown.) Regulates the amount of heat needed to maintain the set
temperature. Each 12" (305 mm) section of the griddle has its own
thermostat with a temperature range of 150°F (65°C) to 550°F (288°C).
Griddle Indicator Light (Not shown.) Will be lit until the selected temperature is reached or when it
is being maintained.
Oven Thermostat Regulates the amount of heat needed to control and maintain oven
temperature around the desired set temperature. The temperature range is
from 150°F (65°C) to 550°F (288°C). Turn dial counterclockwise to increase
temperature and clockwise to decrease temperature.
Infinite Switch for Oven Provides directional heat control. Adjust as needed for the amount of
Top Heating Element top heat required.
Oven Indicator Light Will be lit until the selected temperature is reached or when it is being
maintained.
PL-40464-1
Element
Control
Knobs
Element
Indicator
Light
Oven
Infinite
Switch
Oven
Indicator
Light
Oven
Thermostat