Filter
Top Products
– 5 –
3. Push burner up while pulling the bottom of the
burner forward to clear the burner nozzle.
4. Reverse the procedure to install.
THERMOSTAT
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Drain shortening from fry tank.
2. Remove heat shield as outlined under Covers
and Panels.
3. Remove left burner as outlined under Burners.
4. Remove thermostat knob by pulling knob off
thermostat shaft.
5. Remove thermostat mounting screws and
remove thermostat from mounting bracket.
6. Remove wire leads from the rear of the
thermostat, noting all connections for
reassembly.