Filter
Top Products
– 6 –
7. Loosen the packing nut and holding nut.
8. Remove the thermostat bulb from the clamp.
9. Pull the thermostat bulb through the underside
of the fry tank and remove the thermostat
assembly.
10. Reverse the procedure to install. When
installing the new thermostat assembly, do
not kink the thermostat capillary. Wrap threads
of packing nut with Teflon tape to prevent
leakage.
HIGH LIMIT
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Drain shortening from fry tank.
2. Remove heat shield as outlined under Covers
and Panels.
3. Remove wire leads from high limit, noting all
connections for reassembly.
4. Remove high limit from mounting bracket.
5. Remove left burner as outlined under Burners.