Filter
Top Products
— 16 —
Open Top
1. After cooling the range, remove and clean all top grates as described under Clean After Each
Use or place the grates in a commercial dishwasher (Fig. 9, 10 and 11).
2. Remove cross support bars by lifting them straight up and off the front and rear supports. Clean
the cross supports with soap and warm water or place them in a commercial dishwasher. The
front and rear areas may be wiped off with soap and warm water (Fig. 12 and 13).
3. After cooling, remove the top rings from the burner heads (Fig. 14). These can be soaked in
warm water with mild soap or placed in a commercial dishwasher for cleaning. Be sure to dry
thoroughly before reinstalling. A quick method for cleaning is to remove the rings, turn ON the
top burner, then lay the rings flip side down on the burner head for several minutes. This is a
burn off cleaning process that will remove most debris from the burner ring and allow you to
resume cooking quickly.
NOTE: During burn off cleaning process, the rings become HOT. Use care when handling.
Fig. 11
Fig. 12
Fig. 13
Fig. 14