Vulcan-Hart G260 Range User Manual


 
— 21 —
MAINTENANCE & ADJUSTMENTS
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
LUBRICATION
All moving parts must be checked for wear and lubricated. Contact your local Vulcan authorized
servicer.
Motors in Vulcan convection ovens are permanently lubricated and require no additional maintenance.
FLUE
Annually check the flue when it is cool to be sure it is free of obstructions.
SERVICE AND PARTS INFORMATION
To obtain service and parts information, contact the Vulcan-Hart Service Agency in your area (refer
to our website, www.vulcanhart.com for a complete listing of Authorized Service and Parts depots.
When calling for service, the following information must be available: Model number, device
number, serial number, manufacture date (MD), gas type and voltage. This information can be found
on the unit date plate, located behind the lower front kick panel. Removal of the kick panel is required
to access the data plate.
Precautions
When scraping off heavy deposits of grease or oil from stainless steel equipment, never use
ordinary steel scrapers. Particles of ordinary steel may become embedded in, or lodge on, the
surface of the stainless steel. These will rust, causing unsightly stains and possible contamination
of food. Where it is necessary to scrape, use stainless steel, wood, plastic or rubber tools.