Filter
Top Products
TILTING KETTLE COMPONENTS
STATIONARY AND TILTING KETTLE BOTTOM COMPONENTS
WATER LEVEL CONTROL (WLC
LLCO)
The water level control provides low level cut-off
protection to shut off the heat source in case the fluid
level in the kettle reservoir jacket drops below the
WLC LLCO probe. A single low level cut-off probe
(LLCO) is connected to the control.
The water level control has input voltage of 120VAC
across terminals L1 and L2 which powers the primary
side of the transformer on the board. One side of the
Electric Stationary and Tilting Kettles - ELECTRICAL OPERATION
F45472 (1112) Page 22 of 29