Filter
Top Products
— 10 —
Installation of Hot Top Bricks
The hot top sections utilize composite/mortar fire bricks for heat distribution of the burners. Install
these bricks before connecting the gas supply line or installing the back riser.
1. The composite/mortar bricks are shipped in a rectangular cardboard box. Locate box and
carefully remove two 10" x 4" (254 x 101.6 mm), two 7" x 4" (177.8 x 101.6 mm), and one
triangular 9
7
⁄16" x 2" x 1
7
⁄8" (239.7 x 50.8 x 47.6 mm) bricks. There should be one box of bricks
per hot top section ordered.
2. Rest the hot top plate in a secure area.
3. Install two 10" x 4" (254 x 101.6 mm) composite/mortar bricks, placing the miter edge, one to each
side of the front burner baffle area (see Fig. 4).
4. Install two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area
(see Fig. 4).
5. Install the triangular 9
7
⁄16" x 2" x 1
7
⁄8" (239.7 x 50.8 x 47.6 mm) brick across the baffle burner area
front (see Fig. 4).
6. If burner has been strapped down, remove the wire strapping device, using wire cutters.
7. Check to ensure that all bricks and the burner are secure. Carefully replace the hot top section on
top of the range.
Backsplash
The range is equipped with a 23" (584.2 mm) high backsplash and shelf.
1. Remove the backsplash components from the crating materials.
2. Check the backsplash component parts against the list below to ensure that all the required parts
for the backsplash installation have been obtained. (See Fig's. 5 & 6.) If any parts are missing,
contact your dealer or closest parts depot immediately.
Backsplash Component Parts
MODELS
EG24 EG36 EG60 & 160 EG260
Std. 23" (584.2 mm) Std. 23" (584.2 mm) Std. 23" (584.2 mm) Std. 23" (584.2 mm)
High Backsplash High Backsplash High Backsplash High Backsplash
417330-2 (1) 417331-2 (1) 417433-2 (1) 417334-2 (1)
Backsplash Channel Backsplash Channel Riser Channel Backsplash Channel
417252-1 (2) 417252-1 (2) 417341-1 (1) 417252-1 (2)
Heat Shield Heat Shield Heat Shield Heat Shield
417340-1 (1) 417341-1 (1) 417343-1 (1) 417343-1 (1)
#10 Sht. Metal Screw #10 Sht. Metal Screw #10 Sht. Metal Screw #10 Sht. Metal Screw
3.0145-1 (16) 3.0145-1 (16) 3.0145-1 (20) 3.0145-1 (4)
1
⁄4-20 x 2
5
⁄16" (58.7 mm) Lg.
1
⁄4-20 x 2
5
⁄16" (58.7 mm) Lg.
1
⁄4-20 x 2
5
⁄16" (58.7 mm) Lg.
1
⁄4-20 x 2
5
⁄16" (58.7 mm) Lg.
Machine Screw (4) Machine Screw (4) Machine Screw (4) Machine Screw (6)
Shelf Assembly Shelf Assembly Shelf Assembly Shelf Assembly
417243-G1 (1) 417244-G1 (1) 417246-G1 (1) 417246-G1 (1)