Filter
Top Products
— 11 —
Fig. 5 Fig. 6
3. Assemble the required components as shown in Fig's. 5 and 6.
4. Lift the assembly up, sliding the channels into the space provided at the rear of the range (this may
require two people).
5. It may be necessary to pull the heat shield bottom out slightly in order to clear the oven flue box area.
Be sure the backsplash is resting evenly and the channel holes are lining up with the holes provided
in the right- and left-hand body side (Fig's. 7 & 8).
Fig. 7 Fig. 8