Vulcan-Hart VC4GC ML-136494 Convection Oven User Manual


 
– 11 –
CONTROLS (Models VC4GD and VC6GD With Roast & Hold)
OFF
150
150
225
250
275
300
325
350
375
200
400
425
450
250
475
500
F
100
C
THERMOSTAT
1
2
3
4
5
0
PL-53551
ON
OFF
LIGHTS
NORMAL
R & H
FUNCTION
MASTER SWITCH
OFF
HEAT
ON
IGNITION
OVEN COOL
ON
TIMER
OFF
45
50
55
60
40
35
30
25
20
15
10
5
0
R & H TIMER
1
2
3
4
5
OFF
0
PL-53550
ON
OFF
LIGHTS
R & H
FUNCTION
1
2
3
4
5
0
NORMAL
OFF
TIMER
150
150
225
250
275
300
325
350
375
200
400
425
450
250
475
500
F
100
C
THERMOSTAT
MASTER SWITCH
OFF
HEAT
ON
IGNITION
OVEN COOL
ON
R & H TIMER
Master Switch ON Turns oven control circuits on.
OFF Turns oven control circuits off.
OVEN COOL Allows the fan motor to run with the doors ajar to speed ovencooling.
On Light (Amber) Lit when Master Switch is ON.
Heat Light (White) Comes on and goes off when the burner cycles on and off.
Ignition Light (Red) Comes on if burner fails to ignite. When lighting the oven, the IGNITION
light flashes.
Thermostat Controls oven temperature when Function switch is on NORMAL or during
the first stage of Roast & Hold.
R & H Timer Sets the first stage cooking time in Roast & Hold.
Timer (1 Hr. or 5 Hr.) Sets the bake time when Function switch is on NORMAL. Buzzer sounds
continuously after timer counts down to 0. Oven does not turn off at end
of cycle. Turn Timer to OFF to stop buzzer. When oven is not in use, keep
timer at OFF position.
Function Switch Allows you to select Normal or Roast & Hold (R & H).
Normal: Uses the regular timer and high fan speed.
R & H: Uses the R & H Timer for the first stage of roasting at the
thermostat setting, selects a hold temperature of 160°F (71°C) during
second stage roasting. Uses low fan speed when burners are on.
Lights Switch Turns the lights in the oven ON or OFF.