Filter
Top Products
REMOVAL AND REPLACEMENT OF PARTS
MANIFOLD COVER
Shut off the gas before servicing the
unit.
1. Loosen set screw and remove knobs from control
valves.
2. Remove screws that secure manifold cover and
remove the cover.
3. Reverse procedure to install.
Fig. 1
TOP PANEL ASSEMBLY
Shut off the gas before servicing the
unit.
NOTE: When viewed from the top, there are (5) flue
bracket mounting screws that secure the bracket and
the insulation pan (underneath) to the top panel only.
When removing the top panel assembly, these screws
can remain installed.
1. Remove
LEFT SIDE PANEL and RIGHT SIDE
PANEL.
2. Remove the remaining screws securing Top
Panel Assembly to each side of the flue and back
panel.
3. Lift the Top Panel Assembly off broiler.
4. Reverse procedure to install.
Fig. 2
LEFT SIDE PANEL
Shut off the gas before servicing the
unit.
1. Remove crumb tray.
2. Remove
MANIFOLD COVER.
3. Position the rack assembly to access panel
screws in the broiler opening area.
Fig. 3
SALAMANDER BROILERS RADIANT AND INFRARED - REMOVAL AND REPLACEMENT OF PARTS
F45530 (0814) Page 4 of 17