Filter
Top Products
4. Remove screws securing left side panel. Slide
panel toward the front of broiler until panel clears
front mounting area then remove the panel.
Fig. 4
5. Reverse procedure to install.
RIGHT SIDE PANEL
Shut off the gas before servicing the
unit.
1. Remove crumb tray.
2. Remove
MANIFOLD COVER.
3. Remove screws securing plate stop to broiler.
Fig. 5
4. Pull knob off the handle on rack positioning
bracket then remove plate stop.
5. Position the rack assembly to access panel
screws in the broiler opening area. Remove
screws from this area and the front of panel.
Fig. 6
6. Remove screws securing right side panel to
broiler. Slide panel toward the front of broiler until
panel clears front mounting area then remove the
panel.
Fig. 7
7. Reverse procedure to install.
SALAMANDER BROILERS RADIANT AND INFRARED - REMOVAL AND REPLACEMENT OF PARTS
Page 5 of 17 F45530 (0814)