Wayne-Dalton 44 Refrigerator User Manual


 
2
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,
refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
A. TRACK ROLLERS (AS REQUIRED):
A1. Short Stem Track Rollers
A2. Long Stem Track Rollers
A3. Short Stem Tandem Track Rollers
A4. Long Stem Tandem Track Rollers
B. GRADUATED END HINGES:
B1. Single Graduated End Hinges (S.E.H.), Industry Standard
B2. Double Graduated End Hinges (D.E.H.), Industry Standard
B3. Half Center Hinges (As Required)
C. STACKED SECTIONS:
C1. Top Section
C2. Intermediate(s) Section (As Required)
C3. Bottom Section
D. TOP FIXTURES (AS REQUIRED):
D1. Top Fixtures
E. STRUT (S), U-SHAPED (AS REQUIRED):
E1. Strut (2” And Or 3”)
F. TRACKS (AS REQUIRED):
F1. Left Hand and Right Hand Horizontal Track Assemblies
F2. Left Hand and Right Hand Riveted Track Assemblies (As Required)
F3. Left Hand and Right Hand Wall Angle Track Assemblies (As Required)
F4. Left Hand and Right Hand Vertical Track Assemblies (As Required)
F5. Left Hand and Right Hand Vertical Tracks (As Required)
F6. Left Hand and Right Hand Fully Adjustable (F.A.) Flag Angles (As Required)
F7. Left Hand and Right Hand Fully Adjustable (F.A.) Jamb Brackets (As Required)
G. TORSION SPRING ASSEMBLY (AS REQUIRED):
G1. Center Bracket Bushing Assembly
G2. Center Bearing Bracket Assembly
G3. Torsion Shaft / Torsion Keyed Shaft
G4. Torsion Keyed Shafts
G5. Key Shafts (As Required)
G6. Left Hand End Bearing Bracket
G7. Right Hand End Bearing Bracket
G8. Center Coupler Assembly
G9. Set Collars (As Required)
G10. Left Hand Cable Drum
G11. Right Hand Cable Drum
G12. Left Hand and Right Hand Torsion Springs (As Required)
G13. Counterbalance Lift Cables
H. REAR BACK HANGS:
H1. Left Hand and Right Hand Rear Back Hang Assemblies
H2. Left Hand and Right Hand Rear Center Back Hang Assemblies (As Required)
I. BOTTOM CORNER BRACKETS (AS REQUIRED):
I1. Left Hand and Right Hand Bottom Corner Brackets
J. TRACK ROLLER CARRIERS (AS REQUIRED):
J1. Track Roller Carriers
K. BOTTOM WEATHER SEAL (AS REQUIRED):
K1. Bottom Weather Seal (Door Width)
A2.
A1.
C3.
C1.
C2.
C2.
D1.
D1.
A2.
D1.
E1.
F2.
F1.
F1.
F2.
H1.
H1.
G2.
G13.
G12.
NOTE: The illustrations shown on this page are general
representations of the door parts. Each specific door
models may have unique variations.
G6.
G13.
G12.
G3.
D1.
F3.
F3.
K1.
I1.
H2.
H2.
I1.
G11.
A3.
A1.
A2.
B1.
B2.
B3.
A4.
A1.
G7.
G10.
G5.
J1.
J1.
G9.
G9.
G1.
G5.
G5.
G5.
G8.
G4.
G4.
F7.
F6.
F6.
F7.
F5.
F5.
F4.
F4.
PARTS BREAKDOWN