Wells WM-TR Water Dispenser User Manual


 
DELIMING INSTRUCTIONS (continued)
4. Squeeze solution bottle and force deliming solution into
Water-Max™
Allow Water-Max to set for 10 MINUTES with solution bottle in
place.
5. Press BUTTON on quick-disconnect fitting to release solution
bottle. While pressing button, lift solution bottle straight up.
Unscrew dispenser cap from solution bottle.
Rinse solution bottle and retain for next deliming cycle.
6. Press power switch to ON. Water-Max™ will dispense water
and deliming solution into tank.
When Water-Max™ stops dispensing, press power switch to
OFF. Allow Water-Max™ to set for I HOUR with deliming
solution in tank.
After I hour, drain pitchers of water from tank until tank is
empty.
Pour all water and solution from tank into a sink or appropriate
container for disposal.
7. Remove tank from Water-Max™
Remove TANK COVER from tank. Rinse cover and dry. Store
tank cover for later use.
SQUEEZE
10 MIN
WAIT
REMOVE BOTTLE
UNTIL
TANK
IS
EMPTY
ON
OFF
1 HOUR
ON
OFF
WAIT
REMOVE TANK
REMOVE LID
14