Filter
Top Products
2-4
THE PROTECTION CONTROL SYSTEM
REMOVING THE OVEN DOOR
WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
2. Remove the two screws from the top of
the cabinet for the vent grille and remove
the grille (see the illustration on page 2-3).
3. Open the oven door all the way, then lift
the door pins out of the hinge holes and
remove it.
4. Install the new oven door and the vent
grille on the microwave oven.
1. Disconnect the electrical supply to the
microwave oven.
HINGES
PINS
LIFT DOOR PINS
OUT OF HINGE HOLES