Filter
Top Products
Cleaning the interior components
Electrical Shock and
Product Damage Hazard
l
Do not operate ice maker with lower
access panel or control panel removed.
Eleotrfcal shock or personal injury could
result.
l
Do not wash plastic parts in dish-
washer. They cannot withstand
temperatures above 145°F (63°C).
Failure to follow the above precautions
could result in electrical shock or product
damage.
1. Disconnect the electrical power supply to
the machine, and turn the Cycle Control
Knob to “OFF.” Open the storage bin door
and remove any ice that is in the bin.
2. Remove ice retainer baffle by flexing it and
then slide it off the studs.
3. Remove the ice cutter grid by unscrewing
the two thumb screws, sliding the grid
fonnrard, and unplugging the electrical wire
harness.
4. Remove the water pan by unscrewing and
removing the two thumb screws and
washers.
5. Remove the hose from the water pump.