Filter
Top Products
10
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
Freezer
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
section
too cold
Ice not
made fast
enough
Both
sections
too warm
42
34
24
44
4 4
Removing the drop-in door trim pieces
(on some models)
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.
REASON:
• Door opened often
• Large amount of food added
• Room temperature too warm
• Door opened often
• Large amount of food added
• Very cold room temperature
(can’t cycle often enough)
• Controls not set correctly
for your conditions
• Heavy ice usage
• Very cold room temperature
(can’t cycle often enough)
• Door opened often
• Large amount of food added
• Very warm or very cold room
temperatures