Filter
Top Products
Operating Instructions
Continued
The CANCEL/DRAIN pad
The CANCEL/DRAIN pad allows you to cancel a
cycle, to clear the signal lights or to make a new
selection. If the dishwasher is washing, it will go
into a 2 minute drain automatically before shutting
off. Pressing CANCEL/DRAIN again stops the
drain. If the dishwasher had not been started or is
not washing, it will clear the display. Pressing
CANCEL/DRAIN again will start a 2 minute drain,
if needed.
Using cycle pause
A cycle can be stopped at any time for up
to 10 minutes.
1. Press the DELAY pad. Any signal lights that are
on will flash slowly until the cycle restarts after
10 minutes.
2. The cycle can be restarted sooner by pressing
the START pad.
Control panel lock-out feature
This feature lets you lock-out the function of the
control pads (except to cancel or pause a cycle
that is running). When the control panel is locked-
out, the dishwasher cannot be started and a
running cycle cannot be changed.
To use the lock-out feature:
1. Press and hold the OPTIONS and DELAY pads
until the CLEAN signal light flashes.
2. Release the pads. The CLEAN signal light will
stop flashing.
To turc off the lock-out feature:
1. Press and hold the OPTIONS and DELAY
pads until the CLEAN signal light turns on and
stays on.
2. Release the pads. The CLEAN signal light will
turn off.
6