Filter
Top Products
24
WARNING!
If ov er f l ow oc cur s, tu r n o f f th e m ai n w a te r supp ly be fo re ca l lin g a ser vi ce .
If there is water in the base pan because of an overfill or small leak,
thewatershouldberemovedbeforerestartingthedishwasher.
Longer inlet time.
Faucets is not opened, or water inta ke is restricted, or water
pressure is too low.
Malfunction of temperature sensor or of heating eleme nt.
Short circuit or break of temperature sensor
Open circuit or break of temperature sensor
Longer heating time,
but not reaching required temperature
Failure of temperature sensor
Failure of temperature sensor
Some element of dishwasher leaks .
Overflow .
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or chan ge your detergent.
Rearrange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and sel ect
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those m arks.
Re-loading the dishes properl y.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse -aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program wit h a long washing time.
Water drainage is more d ifficult wi th these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not eno ugh detergent
was dispensed.
Items are blocking
the path of spray arms.
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fit t ed.
This may cause
the s p ay arm jets
to get blocked.
r
Combin ation of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too s oon
Wrong program
has bee n selected
Use of cutlery with
a low-quality coa ting
Error Codes
Uns a ti s
-factory
was hin g
res u lt
Uns a ti s
-factory
dry i ng
res u lt