Adding detergent
The kind and amount of dishwasher detergent you use is an important part of
getting your dishes clean. Read this section carefully.
Use automatic dlsh-
washer detergent only.
Other detergents are
too mild and much too
sudsy to work in the
dishwasher.
Different brands of
dishwasher detergent
have different amounts
of phosphorus. Phospho-
rus softens water and
helps prevent Water
spots on dishes.
If water is hard and
phosphorus content is
low (8.7% or less], you
may need to use more
detergent or use a
brand with a higher
phosphorus content
(12% or higher).
Do not add detergent
until you are ready to
wash. Fresh, dry deter-
gent Is necessary for
best washing results.
Store detergent tightly in
a cool, dry place.
7 The detergent dispenser
The detergent dispenser has one section with
a cover and one without.
l
Put detergent in both sections for cycles with
two washes.
l
Put detergent in the covered section Only
for
cycles with one wash.
l
Push the cover down
until it is latched.
The cover opens auto-
matically when the main
’ wash starts. Detergent in
I
the open section falls
into the dishwasher
when the door is closed.
CyR
COVEY LATCH
Use covered section for...
v
use both
NORMAL WASH Cycle
sections for.. .
LOW ENERGY
POTS & PANS Cycle
WASH Cycle
HEAVY WASH Cycle
CHINA CRYSTAL Cycle
How much detergent to use
The amount of detergent to use
l
HARD-Fill 1 or both
SeCtiOnS to top
depends on the hardness of your
e/ hardness.
line if water is 8 or more grains of
water. If too little is used, dishes won’t
llEPlUM - HI1
1
or
Doln secuons t0
. PL-
-I -__
be clean. However, if too much is
used in soft water, glassware will
begin to etch.
Find out your water’s hardness by
asking your local water depart-
ment, water softener company or
county extension agent.
Rinse aid dispenser
A rinse aid helps keep water from forming droplets and dry-
ing as spots. Keep the dispenser filled with a rinse aid such as
Jet-Dry.” A small amount is released automatically during the
final rinse of each cycle. Check the dispenser periodically to
see if it needs refilling.
The Fill Indicator Cap shows when it’s time to fill the rinse aid
dispenser. When the fill level is low, the center of the cap will
appear to be clear.
Keep the dispenser fill cap tightly closed.