Filter
Top Products
Option Selector Buttons
DELAY WASH Control
Signal Lights
Selecting an option
The AIR DRY Option
ENERGY
SAVING
Air in the dishwasher is automatically heated during the “dry” part of
all cycles except RINSE & HOLD.
AIR DRY
If the AIR DRY Option is selected, air in the dishwasher is not heated.
Using the AIR DRY Option helps save energy, but dishes take longer to
dry [overnight) and some water spotting may result. Some items [such
as plastics) may need towel drying.
HI-TEMP WASHING Option
HI-TEMP
When the HI-TEMP WASHING Option is selected, water for the main wash
and the final rinse is heated to 145°F (63°C) -except in CHINA CRYSTAL
and RINSE & HOLD Cycles.
WASHING
Washing and rinsing action in those parts of the cycle will be longer if
the water is heated. The WATER HEATING HOLD Signal Light will be on to
show that the cycle is delayed while water is heating.
RESET
The RESET OPTIONS Button
OPTIONS
If you want to change a selected option, push the RESET OPTIONS
Button. Re-select an option, if desired.
Using DELAY WASH
DELAY
WASH
Use the DELAY WASH 3.
Control when you want
the selected cycle to 4.
start later-from % to 8
hours after loading the 5.
dishwasher. For exam-
ple, use DELAY WASH to
To set less than 1 hour, turn to 1 hour and then
back to the desired time.
Push Cycle Selector Button and, if desired,
Option Selector Button or Buttons.
The DELAY Signal Light will be on until the
washer starts. The number in the window
will show about how much time is left be-
fore the cycle starts. run during off-peak
hours of electrical use.
You can add items while the DELAY Signal
1. Close and latch the door.
Light is on. Be sure you latch the door. The timer
2. Turn the DELAY WASH Control until the num-
will not continue unless the door is latched.
ber of hours’ delay you want shows in the
You can also change the time while the timer
window. (The control can be moved up or
is counting down.
down to change the setting.)
9