Starting your dishwasher
1.
2.
3.
4.
5.
Spin the Upper Spray Arm to make
sure nothing will stop it from turning
freely.
Close and latch the door.
Run hot water at sink nearest dish-
washer until it is hot.
Push Cycle Selector Button for the de-
sired cycle. (The dlshwasher will start
to fill if the door is latched and the
button is firmly pushed.)
Push Option Selector Button for de-
sired option or options.
Selecting a cycle
POTS 6 PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145’F (63°C) in both
washes and the last rinse [marked ‘1.
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
CLEAN LIGHT
WASH LIGHT ON
RINSE/DRY LIGHT ON
~@p$$j
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 70
minutes.
WASH LIGHT ON RINSE/DRY LIGHT ON CLEAN LIGHT ON
NORMAL WASH Cycle
For normal, everyday soiled loads.
[The Energy Guide Label data is
based on this cycle.) Cycle time is
about 60 minutes.
WASH LIGHT ON
RINSE/DRY LIGHT ON CLEAN LIGHT ON
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 55
minutes.
WASH LIGHT ON
RINSE/DRY LIGHT ON CLE;N UGH! ON
CHINA CRYSTAL Cycle
CLEAN LlGHl
A light wash and gentle dry for
china and crystal. Unless AIR DRY is
selected, the heating element
cycles on and off during the “dry”
part of the cycle. Cycle time is
about 35 minutes.
WASH
LIGHT ON
RINSE/DRY LIGHT ON
RINSE 81 HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 10 minutes.
Use AIR DRY only Do not use HI-TEMP WASHING Option.
WASH LIGHT ON
CLEAN LIGHT ON