Whirlpool ED25PQ Refrigerator User Manual


 
Usln Your Refrigerator
Cont nued 7
Removlng ke maker storage bln
Remove, empty and clean the storage bin:
l
lf the ice dispenser has not, or will not, be used
for a week or more.
l
lf a power failure causes ice in the bin to melt
and freeze together.
l
lf the ice dispenser is not used regularly.
1.
Pull the covering panel out from the bottom
and slide it to the rear.
2. Lii the signal arm so it clicks into the OFF
position. Ice can still be dispensed, but no
more will be made.
3. Lii the front of the storage bin. Pull if out.
4. Empty the bin. Use hot or warm water to melt
the ice il necessary. Never use anythlng
sharp
to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent in warm wafer.
Rinse well. Do not use harsh or abrasive
cleanser or solvents.
6. When replacing the bin, make sure if is
pushed in all the way. Push the signal arm
down to the ON position to restart ice
production.
12