Whirlpool ED25PQ Refrigerator User Manual


 
Using Your Refrigerator
Setting the controls
Controls for the refrigerator and freezer are in the
refrigerator. To adjust
a
control, turn knob. When
the refrigerator is plugged in for the first time:
1.
Set the refrigerator Control to 3.
2. Set the Freezer Control to B.
Give the refrigerator time to cool down com-
pletely before adding food. (This may take
several hours.)
These settings should be right for normal
household refrigerator usage.
The controls will be set about right when milk
or juice is as cold as you like and when ice
cream is firm.
Refrigerator Control adjustments range from
1 to 5. Freezer Control adjustments range from
AtoC.
Changlng the control settlngs
tf you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 18.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
tf Refrigerator
Door opened often
Section is
Large
amount of food added
TOO WARM
Room temperature too warm
Refrigerator
Freezer i
tf Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Refrigerator 3
Freezer C
tf Refrigerator
Section is
TOO COLD
Controls not set correctly
for your conditions
Refrigerator 2
Freezer B
If ICE isn’t
MADE FAST
ENOUGH
tf BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very a&f room temperature
(can’t cyde often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 3
Freezer C
Refrigerator 4
Freezer B
5