Filter
Top Products
Changlng the light bulbs
Refrigerator light
ElectrIcal Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electrlc-
lty leadlng to the refrigerator at the maln
power supply. Failure to do so could result
In elect&al shock or personal InJury.
To change the refrigerator Ilght:
1.
Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find
bulb.
3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.
To change crisper Ilght:
1.
Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower liiht shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect power supply.
To change upper freezer light (ED25PQ only):
1.
2.
3.
4.
5.
Disconnect refrigerator from power supply.
Lii top of liiht shield until if snaps free.
Replace
bulb with
a 40-watt
appliance bulb.
Replace light shield over bulb and snap into
place.
Reconnect power supply.
To change light below Ice bln:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace the light shield.
5. Reconnect power supply.
To change dispenser Ilght:
1.
Disconnect refrigerator from power supply.
2. Reach the bulb through the dispenser area.
3. Replace bulb with a heavy-duty 1 O-watt bulb.
4. Reconnect power supply.
NOTE:
Not all appliance bulbs will fif your
refrigerator. Be sure to replace bulb with one of
the same size and shape.