Filter
Top Products
26
Display shows messages
■ Is the display showing “PF”? There has been a power
failure. Clear the display. See “Display(s)” section. On some
models, reset the clock, if needed. See “Clock” section.
■ Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL to clear the
display. See “Display(s)” section. If it reappears, call for
service. See “Assistance or Service” section.
Self-Cleaning cycle will not operate
■ Is the oven door open? Close the oven door all the way.
■ Has the function been entered? See “Self-Cleaning Cycle”
section.
■ On some models, has a delay start Self-Clean cycle been
set? See “Self-Cleaning Cycle” section.
■ Has a delay start been set? See “Timed Cooking” section.
Oven cooking results not what expected
■ Is the appliance level? Level the appliance. See the
Installation Instructions.
■ Is the proper temperature set? Double-check the recipe in
a reliable cookbook.
■ Is the proper oven temperature calibration set? See “Oven
Temperature Control” section.
■ Was the oven preheated? See the “Baking and Roasting”
and “Broiling” sections.
■ Is the proper bakeware being used? See “Bakeware”
section.
■ Are the racks positioned properly? See “Positioning Racks
and Bakeware” section.
■ Is there proper air circulation around bakeware? See
“Positioning Racks and Bakeware” section.
■ Is the batter evenly distributed in the pan? Check to make
sure batter is level in the pan.
■ Is the proper length of time being used? Adjust cooking
time.
■ Has the oven door been opened while cooking? Oven
peeking releases oven heat and can result in longer cooking
times.
■ Are baked items too brown on the bottom? Move rack to
higher position in the oven.
■ Are pie crust edges browning early? Use aluminum foil to
cover the edge of the crust and/or reduce baking
temperature.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only FSP
®
replacement parts. FSP
®
replacement parts will fit
right and work right because they are made with the same
precision used to build every new WHIRLPOOL
®
appliance.
To locate FSP
®
replacement parts in your area, call our Customer
Interaction Center telephone number or your nearest Whirlpool
designated service center.
For product related questions, please call the Whirlpool Canada
Inc. Customer Interaction Center toll free: 1-800-461-5681
Monday to Friday 8:00 a.m. - 6:00 p.m. (EST).
Saturday 8:30 a.m. - 4:30 p.m. (EST).
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Referrals to local dealers.
For parts, accessories and service in Canada
Call 1-800-807-6777. Whirlpool Canada Inc. designated service
technicians are trained to fulfill the product warranty and provide
after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada
Inc. with any questions or concerns at:
Customer Interaction Center
Whirlpool Canada Inc.
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.