Filter
Top Products
The Key Eject lock...
Chanlging light Bulb...
can help reduce the hazard of child
entra bment.
To lock or unlock the freezer you must hold the
key in the lock while turning. The lock is spring
loaded so the key cannot be left in the lock.
If the key is lost, contact your WHIRLPOOL dealer
for a replacement. Always give the complete
model and serial number of your freezer when
requesting a replacement key.
Freezer Shelves...
Lift the front
Then the back
---
To remove:
Lift front slightly, then lift shelf from back supports
To replace:
Set back of shelf on rear supports then lower
the front on to front mounts.
Bottom Trivet.. .
To remove:
To replace:
l
Lift up, then pull out.
l
Set in bottom ot freezer.
l
Push into place.
4
1. Unplhrg power cord.
2. Rem#:)ve light shield by pulling away from the
side l,vall.
3. Repl::ice bulb with 40 watt appliance bulb.
4. To replace shield, insert tabs into slots in wall
and I:)ress.
To Remove Base Grille...
l
Open the door.
l
Pull grille outwards as shown.
To Replace Base Grille...
4
0,
_. “.
“L ,-.
‘. i:
._,.
SUPPORT TABS
l
line up grille support tabs with metal clips.
l
Push firmly to snap into place.
l
Close 1 he door.
l
00 not remove Tech Sheet fastened behind
the gri le.