Filter
Top Products
Cleaning your freezer
This freezer is a No-Frost model and defrosts
automatically. Complete cleaning, however,
should be done at least once a year.
To clean:
1, Turn Cold Control to OFF.
2. Unplug power cord.
3. Remove food.
4. Rer-love shelves and trivet.
5. Clel.:ln freezer according to the following
dire::tions.
After cleaning:
1. Replace shelves and trivet.
2. Plug in power cord.
3. See directions for “Setting the Cold Control,”
Note: Wrap frozen foods and packages in sev-
eral layers of newspaper and cover with a blan-
ket. Food will stay frozen several hours.
pag’t:? 3
Part
Removable parts
(shelves, trivet, etc.)
Outside
Inside walls [Freezer
should be allowed to
warm up so cloth won
stick.)
Door liner and gasket
What to use
Mild detergent and
warm water
How to clean
l
Wc.lsh removable parts with warm water
and a mild detergent.
l
Rirlse and dry.
Sponge, cloth or paper
l
Wash with warm water and a mild
towel; mild detergent;
delergent. Do not use abrasive or
appliance wax (or
harsh cleaners.
good auto paste wax].
l
Rinse and dry.
l
Wax painted metal surfaces at least twice
a year with appliance wax or a good auto
paste wax. Apply wax with a clean, soft
cloth. Do not use wax on plastic parts.
Waxing
painted metal
surfac:es provldes rust protection.
Sponge, soft cloth or
l
WcI:jh with warm water and
paper towel, baking
-m/Id detergent or
soda, warm water, mild
baking soda solution (2 tablespoons
detergent
[ 26 g] baking soda to 1 quart [.95L]
wa rrn water).
l
Rin!.,e and drv.
Sponge, soft cloth or
paper towel; mild
detergent, warm water
l
Wcsh with mild detergent and warm
water.
l
Rini,e and dry.
I
DO NOT USE cleaning waxes, concentrated detergents, bleaches
I I
or cleaners containing
Detroleum on plastic Darts.
Drain trough
I
Baking soda, warm
water
Defrost pan
Warm water and mild
detergent
Condenser coil
Vacuum cleaner; using
the extended narrp..#
attachment
I
l
Remove trivet.
l
Poilr baking soda solution (2 tablespoons
[ 26 g ] baking soda to 1 quart (.95LI warm
water) directly into drain trough.
l
Remove base grille (see page 4.1
l
To remove defrost pan, lift pan over wire
braze (remove tape; if any).
l
Wai;h defrost pan with warm water and
mill.:1 detergent.
l
Rin:;e and dry.
l
Replace with notched corner to the rear.
l
Pus11 it all the way in.
l
Make sure defrost tube is pointing into pan.
--
0 Remove base grille.
l
Clean dust and lint from condenser
(evc?ry 2 to 3 months).
l
Replace base grille.
-I