Filter
Top Products
Using your freezer
Setting the temperature control...
Adjusting the temperature control...
To start, turn control to the middle of the dial This
setting IS designed to morntarn the temperature at
:lr near 0 F (~ 17 8 ‘C] under normal operatrng
::ondrtions
1 Turn control to higher number for colder temper-
atures
2 Turn to lower number for less cold temperatures.
Cooling freezer first...
1 Allow freezerto cool 6 to 8 hours before frlllng wrth
frozen food.
The Power Saving Control...
operates electrrc heaters. These heaters help pre-
vent morsture from forming on the outstde of the
freezer when hurnrdity is high
1 Use the OFF setting to save energy when humidrtv IS
low
? Use the ON setting only if moisture forms or the out-
side of the freezer
Removing and adjusting the top
freezer shelf...
To remove shelf:
1. Loft front, then back off supports
2 Replace in reverse order
To adjust shelf:
1 Remove shelf
2 Remove supp4s by slicing upwOrds
3 Replace supl;cxts on desired level
4 Replace shelf
Adjusting the freezer shelves...
To remove shelf:
1 Remove food from shelf
2 ,et It cool overnight before adurng large amount
of unfrozen food.
Note: ‘When freezer 1s firs? started, the compressor
sti~ll run constantly unttl the cabinet IS cooled It may
take IJP to 6 to 8 hours or longer, depending on room
temperature and the r,umber of times the freezer
door 1s opened
After the cabinet IS cooled, the compressor will
‘urn ‘:IN and OFF as needed to keep the freezer at
the proper temperature
stops
2
Slide shelf strc ght out to star>
S ,ift fron:
4
Slide the rest : r the way out
To replace shelf:
1 Fit bock of shelf on top of gurdes with wire stops on
bottom of gui; les
2 Loft front ther slide shelf until It clears the guide