Filter
Top Products
Setting the electronic clock
When you first plug in the range, or if your
electricity was off for a while, the display will
show “88:88”, then change to “--:--“. SET and
CLOCK will show in the display.
1. Push the Clock button. “12:OO” will show in the
display.
2. Turn the Set Knob until the correct time shows
in the display.
3. Push the Clock button to start clock operation.
Using the electronic Timer
The Timer does not start or stop the oven. It
works like a kitchen timer. Set it in minutes up to
24 hours.
1. Push the Timer button. SET and TIMER will
come on and the display will show “:OO”.
2. Turn the Set Knob until the desired time
shows in the display. The timer will begin
counting down two seconds after the time is
set. You will hear two tones when one minute
is remaining on the timer. When the time is up,
you will hear three tones. You will hear two
tones every 10 seconds until you cancel the
Timer.
3. To cancel, push the Clock button and the
display will return to the time of day.
11