Filter
Top Products
b-UP COOKCOP AND SURFACE BURNERS
1.
Remove the surface burner grates.
1
2. Lift the front of cooktop at both front corners
71 ;;E~yf;z;r3.
cooktop. Damagecould
result to the porcelain
and the cooktop frame.
3. Wipe the surface under the cooktop with warm,
71 ;;~Fzz&2zPg
pad on heavily soiled
areas.
4. Wipe off the surface burners with warm, soapy
food, soak the burners
in a vinegar and water
solution for 20-30
minutes. Then scrub
them with a plastic
scrubbing pad. (See
page 21 for more
information.)
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
5. Check the burner flames once in a while for proper
size and shape as shown.
Ports
A good flame is blue in
color. If flames lift away
from ports, are yellow,
or are noisy, turn off the
burner. Allow the burner
to cool and follow Step 6.
- If you still have a problem,
contact an authorized
Roper service technician
to check the air/gas
mixture or see the Installation Instructions.
6.
If the ports are clogged, clean with a straight
pin. DO NOT enlarge
or distort the ports.
DO NOT use a tooth-
pick to clean the ports.
Toothpick pieces may
clog the ports.
22