32
YOU SEE
O
N
HEAT
DTIME
CLEAN
TIME
LOCKED
YOU SEE
CLEAN
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄2-4
1
⁄2 hours shows on the display.
•
Use 2
1
⁄2 hours for light soil.
•
Use 3
1
⁄2-4
1
⁄2 hours for average to heavy soil.
3. Press DELAY START TIME.
4. Set the start time.
Press the “up” (s) or “down” (t) pad(s) until the
desired start time shows on the display. The
oven will automatically come up with the stop
time by adding the set cleaning time to the set
start time.
5. Press START/ENTER.
SETTING THE CONTROLS (CONT.)
USING THE SELF-CLEANING CYCLE
HR MIN
START
CLEAN
TIME
(example for 2:30 start time)
PRESS YOU SEE
PRESS YOU SEE
START
ENTER
5 SEC
O
N
DELAY CLEAN
PRESS YOU SEE
(example for 4
1
⁄2-hour cycle)
HR MIN
CLEAN
TIME
PRESS YOU SEE
DELAY
START
TIME
START
CLEAN
TIME
6. After the Self-Cleaning cycle starts:
The door will lock as soon as the oven starts to
heat up.
7. After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.