Whirlpool GR395LXG Range User Manual


 
42
PROBLEM
Nothing works
CAUSE
The range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
You have blown a household fuse or tripped a circuit breaker.
The control knob is not set correctly. Push in the control knobs before
turning them.
You have not set the electronic control correctly. Refer to the proper
instructions.
You have blown a household fuse or tripped a circuit breaker.
The coil elements are not plugged in all the way (Model GR395LXG).
(See “Replacing” on page 37.)
You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
Turn the ACCUSIMMER knob to NORMAL BURNER position.
Turn left front control knob to HI for a rapid boil.
Turn left front control knob on, along with the ACCUSIMMER knob.
Turn left front control knob to Max, along with turning the ACCUSIMMER
knob on.
TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see “Requesting Assistance or Service” on page 44.
RANGE DOES NOT WORK
The oven does not work
The surface cooking
areas will not work
Cannot boil on left front
element/ACCUSIMMER™
feature
ACCUSIMMER will not
simmer
ACCUSIMMER element
does not get hot enough
WHEN SELF-CLEANING YOUR OVEN
PROBLEM
The Self-Cleaning cycle
will not work
CAUSE
You did not press START/ENTER.
You have set a delayed start time. Wait for the start time to be reached or
cancel and reset the control.
The door is not closed all the way.