Whirlpool HD1000XSC7 Water Dispenser User Manual


 
Before using the first time
Check that installation Steps 14-16
were completed.
The hot water dispenser can be
permanently damaged if these steps
are not followed.
Temperature control
The water temperature is
thermostatically controlled. It can be
adjusted from “Off” to approximately
190°F.
To raise or lower the temperature,
turn the Temperature Control. The
“Max” setting is recommended for
best performance. However, under
certain conditions, it is possible for
the water to boil when the
Temperature Control is set at “Max.”
If you see any vapor or hear boiling,
turn Temperature Control to lower
temperature as necessary.
Dispensing hot water
Turn the On/Off Cap clockwise and For maximum flow, turn cap until it
hold until desired amount of hot
stops. Release the On/Off Cap to
water is obtained. You can control the turn off water.
flow of water by how far you turn the
cap.
Hot water dispenser uses
Regardless of what food you are
preparing, you’ll appreciate the
convenience and time saved by your
hot water dispenser. The dispenser
allows you to draw the amount of hot
water you require [up to 2 quarts at
one time]. It eliminates the need to
heat a full teakettle for a cup of hot
water.
Preparing instant foods and drinks
Instant foods that require only 190°F water for complete preparation include:
n
coffee w soup or bouillon W frosting mix
n
tea w mashed potatoes
n
hot chocolate W instant cereal
Cooking shortcuts
190°F water will give you a fast start for any food you cook that requires boiling
water such as:
w packaged dinners
n
dried soup w hot cereals
w fresh or frozen
n
meat cooked in w pasta and rice
vegetables liquid
w boiling eggs
Other uses
n
loosening jar lids w dissolving gelatin
n
peeling tomatoes or w thawing frozen foods
peaches
n
preparing vegetables
for canning