Filter
Top Products
6. Touch START.
d
count
QWll
The COOK and COOK POWER
Indicator Lights will stay on to show
that the oven is cooking in the
first cycle at a Cook Power other
than high.
The Display counts down the time to
show how much cooking time is left
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the Dis-
play and a beep will sound every 60
seconds (to remind you that food is left
in the oven) until the door is opened
or CANCEL is touched. The Display will
then show the time of day,
Changing cook power
You can change Cook Power before or after touching START.
. Touch COOK POWER.
l
Touch a number for the new Cook Power
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
l
Touch COOK POWER twice if you want to change a lower Cook Power to HIGH.
l
Touch START.
Using AIrTO SET
AUTO SET provides ten preset times. One to nine minutes at HIGH cook power can be set by touching
AUTO SET and the corresponding number pad l-9. This provides a short-cut method for setting
commonly used cooking times.
The AUTO SET chart included with your convection microwave oven and the AUTO SET guide on the
interior oven frame help you use AUTO SET to cook various food items without having to look up the
cooking times.
A preset time of 2 minutes, 30 seconds at HIGH cook power is available simply by touching AUTO SET,
then START. The time may be changed to any time from 0 to 99 minutes, 99 seconds allowing you to
store your favorite cooking time and Cook Power. See page 12 for instructions.
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.