Changing the pre-programmed setting
You can change the pre-programmed cooking time and Cook Power in AUTO SET to the time and
power you most often use. To change the AUTO SET setting, follow these steps.
1. Touch AUTO SET twice.
2. Touch the Number Pads forthe new desired cooking time.
3. Touch COOK POWER.
4. Touch the Number Pad for the desired Cook Power, or touch COOK POWER a second time if
you want to change Cook Power to HIGH.
5. Touch AUTO SET. Touch CANCEL. The oven will remember that time and Cook Power for future
use. NOTE: If electric power ever goes off, the oven will go back to the pre-programmed
2 minutes, 30 seconds at high Cook Power setting.
Defrosting with microwave energy
Use QUICK DEFROST to thaw frozen food before cooking. For suggested defrost times, see the guide
on the interior oven frame or in your CONVECTION MICRO MENUS” cookbook.
DO THIS...
1.
Put frozen food in the oven
and close the door.
m
.a
2.
Touch QUICK DEFROST.
3. Touch Number Pads for the
defrosting time you want.
THIS HAPPENS...
The QUICK DEFROST Indicator Light
will come on and the Display will
show four 0’s.
4.
Touch START.
The Display will show the numbers
you touched in the order you
touched them. This example shows
2 minutes, 45 seconds.
The QUICK DEFROST Indicator Light
will stay on to show that the oven is in
the Quick Defrost cycle.
The Display counts down the time to
show how much defrosting time is left.
When the defrost time ends, “End” will
show on the Display and 4 beeps will
sound. [You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the Dis-
play and a beep will sound every 60
seconds [to remind you that food is in
the oven) until the door is opened or
CANCEL is touched. The Display will
then show the time of day.
12