Filter
Top Products
2.
Touch AUTO SET.
(NOTE: Skip to Step 6 if
you want to use the preset
cooking time and Cook
Power.)
3. Touch a Number Pad for
the new cooking time you
want from 1 to 9 minutes.
I.
El
. .
4.
Touch COOK POWER.
(Option: Skip to Step 6 if
you want to cook at high
power.)
5. Touch a Number Pad for
the Cook Power you want.
6. Touch START.
The AUTO SET Indicator Light
will come on and the Display
will show 2 minutes, 30 seconds [or the
time you have set as your favorite
cycle).
The Display will show what you
touched in even minutes. This
example shows you touched 4
minutes.
The COOK POWER Indicator Light
will come on and the Display
will show “P-HI:’
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.
The AUTO SET Indicator Light will Stay
on while the oven is cooking in the pre-
programmed cycle. If you selected a
Cook Power other than high, the Cook
Power Indicator Light will also come
on. This shows the oven is cooking at a
selected Cook Power.
The Display counts down the time to
show how much cooking time is left.
When Auto Set ends, “End” will
show on the Display and 4 beeps
will sound. [You can stop the
beeping by opening the door or
by touching CANCEL.) “End” will
remain on the Display and a beep
will sound every 60 seconds
(to remind you that food is left in the
oven] until the door is opened or
CANCEL is touched. The Display will
then show the time of day.
NOTE: You can set COOK or PROBE TEMP to follow Auto Set, if desired. Touch in instructions
for ‘Microwave Cooking at High Cook Power” (page 81, “Microwave Cooking at lower Cook
Powers” (page 9) or ‘Cooking with the Temperature Probe” (page 16).