Filter
Top Products
Number pads
Once you’ve touched a Command Pad
to tell the oven what you want It to do. you’ll
touch Number Pads to tell it..
-
a time,
-
a Cook Power,
-
a food temperature.
Setting the clock
Cooktop fan and light controls
The two switches at the bottom of the
control panel control the 2-Speed Exhaust
Fan and the fluorescent Cooktop Light.
Press the Exhaust Fan switch to the right
for HIGH, to the left for LOW and center it
to turn OFF. (NOTE: If the temperatirre
gets too hot around the microwave oven,
the exhaust fan in the vent hood will
automatically turn on or change to the
HIGH sewing to protect the oven. It
may stay on up to an hour to cool the
oven. When this occurs, the Exhaust Fan
switch will not turn the fan OFF.)
Press the Cooktop Light switch to the right
to turn the light ON. Press switch to the
left to turn it OFF
You can cook without setting the clock, but the Display will show a colon for 5 minutes
after the cooklng is done, then go blank
DO THIS...
1. Touch CLOCK SET.
2.
Touch CHANGE/CANCEL
Pad once.
3. Touch Number Pads for
the correct time of day.
THIS HAPPENS...
The CLOCK Signal Light will come
on and the Display will show a colon
4.
Touch START.
The CLOCK Signal Light and the
colon will blink once.
The Display will show what numbers
you touched in the order you touched
them. This example shows 3 25
The Display will show the time of
day, and the CLOCK Signal Light
will stay on.
If you have touched In an Incorrect
time such as12 65, the Display
will
go blank and you will hear a beep.
Reset the Clock.