Filter
Top Products
The Display will show what you
touched. Thls example shows you
touched Number Pad 5 for 50% of
full power.
6.
Touch START.
The AUTO SET and PROBE TEMP Indlca-
tor Llghts will stay on. The Dlsplay will
show CCCL” If the food Is less than
90°F As the foad cooks. the Dlsplay
will show the Internal temperature of
the food for every 5°F Increase.
When the probe senses the tempera-
lure you selected, the oven shuts off.
“End” will show on the Dlsplay and 4
beeps will sound. (You can stop the
beeplng by opening the door or by
touching CANCEL) “End” will remain
on the Dlsplay and a rernlnder tone
wtll sound every 60 seconds (to
remlndyouthatfoodlsleftlnfhe
oven) until the door Is opened or
CANCEL Is touched. The Dlsplay will
then show the the of day.
NOTE: You can set Auto Set TEMP to tollow COOK.
Auto Set TEMP can be programmed with the Temperature Probe out, but the oven will
pause between the last Cook cycle and “PRCB” will show on the Dlsplay to remlnd
you to plug In the Temperature Probe.
Changing the Pwprogrammed Sefflng
You can change the pre-progmmmed temperature and Cook Power In Auto Set TEMP to
the tempemture and power you most often use. To change the Auto Set TEMP sefflng, follow
these steps:
1.
Touch Auto Set TEMP twlce.“F” will be dlsplayed.
2. Touch the Number Pads for the new deslred temperature between 90°F and 200°F
If HIGH Cook Power Is deslred, sklp to Step 5.
3.
Touch COOK POWER.
4. Touch the Number Pad for the deslred Cook Power.
5. Touch START. The oven will start. If food Is not to be cooked at thls time, touch CANCEL
The new tempemture and Cook Power will be stored In memory for future use. MOTE:
It electric power ever goes off, the oven will go back to the pre-programmed
165T at HIQH Cook Power setting.