Filter
Top Products
Replacing the cooktop and oven lights
Fire Hazard
Use only candelabra-base bulbs,
30-watt maximum.
Turn off power at main power
supply before replacing the light
bulb.
Failure to follow the above could
result in fire or electrical shock.
The cooktop light
1. Turn off power at the main power supply.
Bulb cover
mounting screws
2. Remove the bulb cover mounting screws.
3. Replace bulb(s) with candelabra-base
30-watt bulb(s) available from your
authorized Roper service company
(Part No. 4158432).
The oven light
1. Turn off power at the main power supply.
ul
w
Electrical Shock Hazard
Disconnect power before removing
vent cover.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
2. Remove the vent cover mounting screws.
3. Tip the cover forward, then lift out to
remove.
continued on next page 39