Whirlpool MT5120XAQ Microwave Oven User Manual


 
10. TIMER/PAUSE.
Touch this pad to set the
Minute Timer or to stop the oven between
cooking stages. See pages 17 and 35 for
more information.
11. START/ENTER.
Touch this pad to start
a function. If you open the door after the
oven begins to cook, retouch START/
ENTER.
12. POWER LEVEL.
Touch this pad after
the cook time has been set, followed
by a Number Pad to set the amount of
microwave energy released to cook the
food. The higher the number, the higher
the microwave power or “cooking speed.”
See page 20 for more information. See
the “Microwave cooking chart” on page
40 for specific Cook Powers to use for
the foods you are cooking.
13. OFF/CANCEL.
Touch this pad once to
erase an incorrect command, cancel the
Minute Timer or stop the oven temporarily
during cooking. Touch it twice to cancel
a program during cooking or to clear the
Display.
NOTES:
l
if you touch
two Command Pads for the
same cycle (for example, EASY DEFROST
and AUTO COOK), the second command
will cancel the first.
l
if you attempt
to enter unacceptable
instructions, “ERROR” will appear on the
Display.
Touch
OFF/CANCEL and
r-e-enter
the instructions.
Audible signals
Audible signals are available to guide you
when setting and using your oven:
l
A programming tone will sound
each
time you touch a pad.
l
A single long tone
signals the end of a
cooking cycle or Minute Timer function.
l
To cancel tones,
touch AUTO START/
CLOCK followed by Number Pad 5 and
START/ENTER.
To turn tones back on,
touch AUTO START/CLOCK followed by
Number Pad 5 and OFF/CANCEL.
Interrupting cooking
You can stop the oven during a cycle by
opening the door. The oven stops heating
and the fan stops, but the light stays on.
To restart cooking, close
the door and
Touch
I I
START
I I
ENTER
If you do not want to continue cooking:
l
Close
the door and the light goes off.
OR
l
Touch
1 1
OFF
I I
CANCEL
Using the safety lock
The safety lock prevents unwanted operation
of the microwave oven by small children.
To lock or deactivate the control panel:
1. Touch
AUTO START/CLOCK.
2. Touch
Number Pad 1.
3. Touch
START/ENTER.
“LOCK” will appear on the Display if a pad is
touched.
To cancel safety lock:
I. Touch
AUTO START/CLOCK.
2. Touch
Number Pad 1.
3. Touch
OFF/CANCEL.
14