Filter
Top Products
6. Touch START.
d
count
own
The COOK1 Signal Light will stay on
to show that the oven is cooking. The
Cook Power Signal Light will go off.
The oven will cook in the Cook
Power you selected.
The Display counts down the time to
show how much cooking time is left
The Cook Power can be checked by
touching the COOK POWER Pad. The
COOK POWER Signal Light will come
on and the Display will show the
Cook Power you selected. Touch
START to return the Display to the
countdown.
When the cooking time ends, you
will hear 3 beeps. When the beep-
ing stops, the Display will show
the time of day.
Changing cook powers
l
Cook Power can be changed at any time during the cooking cycle.
-Touch COOK POWER.
-Touch a number for the new Cook Power.
-Touch START The oven will continue to cook at the new Cook Power
OR...
-Touch COOK POWER.
-Touch CHANGE/CANCEL Pad once, then touch START if you want to change a
lower Cook Power to HIGH.
Faster or slower defrosting
When you DEFROST at Cook Power 5, the microwave oven automatically uses 50%
of full power. For slower or faster defrosting:
l
Use 30% of full power for slower defrosting.
l
Use 60% of full power for faster defrosting. Defrosting at Cook Powers higher than
50% can cause more cooking on the outside of the food.
Standing time
For best results, allow the food to stand for a while after defrosting. This helps
equalize the temperature of the food to provide more even cooking.
Defrosting and cooking in two cycles
For best results, some recipes call for one Cook Power for a certain length of time, and
another Cook Power for different length of time. Your microwave oven can be set to
change from one to another automatically.
The controls on your microwave oven can also be set to defrost in Cookl, then
automatically cook in Cook 2.
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
12