Filter
Top Products
Checking or changing cooking time or Cook Power settings
To double check settings:
1. Touch the command pads for the settings you want to check. The cooking time or Cook
Power settings you touched in for those pads will show in the Display.
2. Touch START to start the oven or to return the Display to show what the oven is doing,
To change the cooking times during operation:
I. Touch CHANGE/CANCEL Pad once. The oven will go off and the Display will show a
colon. Touch in the new cooking time, then touch START. The oven will continue cooking
for the new time.
To change Cook Powers during operation:
I. Touch COOK POWER Pad once, The Display will show the Cook Power for the Cook Cycle
in operation. Touch in the new Cook Power, then touch START. The oven will use the new
Cook Power for the rest of the Cook Cycle.
Cooking with the TEMPERATURE PROBE
followed by KEEP WARM
The Temperature Probe helps take the guesswork out of cooking roasts and casseroles.
The probe is designed to turn off the oven when it senses the temperature you set. See
page18 for helpful information on cooking differenttypes of food.
After the food reaches the temperature you set, the oven will automatically go into a
Keep Warm cycle. This allows you to keep food warm for up to 60 minutes. KEEP WARM
will only operate if the Temperature Probe is used in the last Cook Cycle. If will
continue to operate for 60 minutes or until if has been cancelled.
Do not hold food for more than an hour. The qualify of the food will suffer with
extended time.
DO THIS...
1.
Insert at least YZ of the
temperature probe into
the food.
DO THIS...
4.
Touch PROBE TEMP.
2. Place food in the oven
and plug the probe plug
into the socket on the back
oven wall.
THIS HAPPENS...
3.
Make sure the probe
cable does not touch
any part of the oven
inferior. Damage to
the probe or oven could
result. Close the door.
The COOK1 Signal Light will come
on and the Display will show an ‘I”