Minute timer
The microwave oven controls can be used as a kitchen timer. Use COOK 1 at “0” Cook
Power for timing up to 99 minutes, 99 seconds.
DO THIS...
THIS HAPPENS...
The COOK 1 Indicator Light will
come on and the Display will show
four “0”s.
2. Touch Number Pads for
the minutes and seconds
you want.
The Display will show the numbers
you touched in the order you
touched them. This example shows
1 minute, 45 seconds.
The COOK POWER Indicator Light
will come on and the Display will
show “P-HI’:
--
m
0
The Display will show “P-O’: This tells
you that the oven will be operating
at 0% power,
4. Touch “0” Number Pad.
5. Touch START.
NOTE: If YOU hear the
fan start-when you
touch START, you have
not set the time prop-
erly. Touch CANCEL
and start over.
The Cook 1 and Cook Power Indicator
Lights will stay on to show you that
the timer is running.
The Display counts down to show
you how much time is left During
the countdown the oven will be
dark and the fan will be off
When the set time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.
If you hear the fan start when you
touch START, you have not set the
tlmer properly. Touch CANCEL and
start over.
Opening the oven door stops the
countdown. Close the door and
touch START to continue the timing
countdown.