Filter
Top Products
d
COUd
0Wl-l
The Display counts down the time
to show how much time is left in the
first cycle
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.] “End” will remain on the Dis-
play and a reminder tone will sound
every 30 seconds until the door is
opened or CANCEL is touched. The
Display will then show the time of day.
Changing the cooking time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
lower cook powers
For best results, some recipes call for lower Cook Powers. The Ic ,verthe Cook Power, the
slower the cooking. Each Number Pad also stands far a different percentage of Cook Power,
Many recipes in your MICRO MENUS’ Cookbook tell you, by number, which Cook Power to
use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or
percentage (IO%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = TIMER (fan and light will be off]
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and close
the door.
The COOK 1 Indicator Light wtll
come on and the Display will show
four O’s
3. Touch Number Pads for the
cooklng time you want.
The Display will show the numbers
you touched in the order you
touched them. This example shows
7 minutes, 30 seconds.
8