Filter
Top Products
Using Your Microwave Oven
Continued
1. Touch CLOCK SET. The Display will show a “0”
and the colon will start to flash. The first
Number Pad must be touched within 5
seconds or the Display will go blank. If the
Display goes blank, touch CLOCK SET again
and continue.
2. Touch Number Pads for the correct time of day.
The Display will show what numbers you
touched in the order you touched them. This
example shows 3:25.
3. Touch START. The colon will stop flashing. The
Clock is set.
If you have touched in an incorrect time, such
as 12:65, “Err” will show on the Display. Touch
CLOCK SET and start over.
NOTE: To &the clock, touch CLOCK SET. The
current time will show on the Display and the colon
will flash. Continue to set the clock as shown
above.
10