Using Your Microwave Oven
Continued
-
I. .I
4. Touch START. The oven will automatically cook
at HIGH Cook Power.
--=I
The COOK 1 Indicator Light will stay on to
show that the oven is cooking in the first cycle.
The Display counts down the time to show
, ,.. .a I. I
now mucn time IS ten in rne rirst cycle.
When the cooking time ends, “End” will show
on the Display and 4 beeps will sound. (You can
stop the beeping by opening the door or by
touching CANCEL.) “End” will remain on the
Display and a reminder tone will sound every 30
seconds (to remind you that food is left in the
oven) until the door is opened or CANCEL is
touched. The Display will then show the time of
day.
Changing the cooking time
Cooking time can be changed any time before or
after touching START:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 cycle will continue cooking for the new
time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook
Powers, The lower the Cook Power, the slower the
cooking. Each Number Pad also stands for a
different percentage of Cook Power. Many recipes
in your MICRO MENUS” Cookbook tell you, by
number, which Cook Power to use. Recipes in
other books and magazines may tell you by name
(HI, MED. LO, etc.) or percentage (lo%, 50%,
8004 etc.).
The following chart gives the percentage of Cook
Power each Number Pad stands for, and Cook
Power name usually used:
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = TIMER (fan and light will be off)
1. Put food in the oven and close the door.
12