Filter
Top Products
6. Touch COOK POWER.
(Optlon: Skip to Step 8 if you
want to use HIGH power.)
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI:’ This shows the oven is prepro-
grammed to cook at full (HIGH) power.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60%
of full power.
8. Touch START.
BEEP BEEP
When the Cook cycle ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching CAN-
CEL.) “End” will remain on the Display
and a reminder tone will sound every
60 seconds (to remind you that food
is left in the oven] until the door is
opened or CANCEL is touched. The
Display will then show the time of day.
d
OWll
When you touch START, the QUICK
DEFROST Indicator Light will stay on. All
other Indicator Lights will go off. The
Display counts down the time to show
how much time is left in the Quick
Defrost cycle.
When the defrost time ends, the micro-
wave oven automatically lets the food
stand for the same amount of time
used for defrosting. The QUICK
DEFROST Indicator Light stays on and
the Display counts down the standing
time. During the countdown the oven
will be dark, and the fan will be off.
When the standing time is over, you
will hear 2 beeps and the Cook cycle
will start.
The COOK Indicator Light will be on
during the Cook cycle. The COOK
POWER Indicator Light will also be on
if you are using a Cook Power other
than HIGH.
The Display counts down the time
to show how much time is left in the
second cycle.
12