Filter
Top Products
d
CDUd
QWn
Changing the cooking time
The Display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching CAN-
CEL.) “End” will remain on the Display
and a reminder tone will sound every
60 seconds (to remind you that food
is left in the oven] until the door is
opened or CANCEL is touched. The
Display will then show the time of day.
Cooking time can be changed any time before touching START or during the cycle:
I. Touch COOK.
2. Touch numbers for the new time.
3. Touch START.
Cook cycle will continue cooking for the new time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lowerthe Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use.
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or
percentage (IO%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook
Power name usually used.
automatic 100% of full power HIGH
9 =
90% of full power
8 =
80% of full power
7 =
70% of full power MED-HIGH
6 =
60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = timer (fan and light will be off]
DO THIS...
THIS HAPPENS...
I.
Put food in the oven and
close the door.
nnm
.
uuw
._
The Display will show the numbers you
I
touched In the order you touched
them. This example shows 7 minutes,
30 seconds.
3. Touch Number Pads for the
cooking tlme you want.
a