Filter
Top Products
Using your
Microwave oven
There are three parts in
microwave
controls
the control section:
-The Digital Display/Clock, and Indicator Lights
the Display will be blank. If after you set the Clock
-Command Pads
(page 6), the Display becomes blank again, it
- Number Pads
means your electricity was off for a while. Reset
the Clock.
Instructions for each control are covered on the
following pages. Read them carefully.
Digital display/clock and
indicator iighfs
Command pads
oven
When you first plug in the oven, a tone sounds and
When you are not using
the microwave oven, this
is an accurate digital
clock. When you are
using the microwave
oven, it displays time set-
tings, temperature set-
tings and Indicator
Lights.
Touch Command Pads
to tell the microwave
oven what to do and in
what order. A few
examples:
-CLOCK SET tells the
oven you are going
to set the clock.
- START tells the oven
to start.
See page 6 for informa-
tion on the tone you
hear when touching any
pad.
Each Command Pad, (except START, CANCEL
and CLOCK SET] lights an Indicator Light on
the digital display. The Indicator Light comes
on when you touch the Command Pad.
While the oven is running, an Indicator
Light [or lights) will be on to show what
the oven is doing.
Number pads
-
a food
temperature.