Filter
Top Products
6.
7.
8.
9.
Touch COOK CYCLE 2.
The COOK CYCLE 2 Signal Light will come
on and the Display will show 4 O’s
The Display will show the numbers you
touched in the order you touched them.
:hls example shows 4 minutes. 30 seconds.
Touch Number Pads for
the cooking time you
want in the second
cycle.
The COOK POWER Signal Light will come on
and the Display will show 2 O’s
Touch COOK POWER. (If
you want the high Cook
Power, skip to step 10.)
The Display will show what you touched
This example shows 40% of full power.
Touch a Number Pad for
the Cook Power you
want in the second
cycle.
10. Touch START.
For a third cooking
cycle, touch COOK
CYCLE 3 and repeat
steps 7,8 and 9.
10
count
than high. All other Signal Lights will go off.
d
The Display counts down the cooking time
own
to show how much time is left in each
cycle.
tam
For 2 of every 10 seconds of countdown,
the Display will show the Cook Power you
selected, if you are using a Cook Power
other than high.
You will hear a beep at the end of each
cycle. You can either open the door to
check the food, or you can let the oven
start the next cycle. If you do open the
door, touch START after closing the door to
restart the oven.
The COOK CYCLE 2 Light will be on during
the second cycle. If a third cycle is used,
the COOK CYCLE 3 Light will be on during
that
d
count
own
The COOK POWER Light will be on during
any cycle using a Cook Power other than
high